What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 17.06.2025 09:51

This is where the MOV conducts again, and dissipated the energy.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Who is the most trusted person in your life, and do they have the same trust on you?
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
But… the neutral is now “floating” because of the 1 ohm resistance.
2024–10–10[John johnson John Johnson ]
First Sentence:
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
2024–10–16 [ OO OLAOYE OYEBODE ]
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
These devices are installed between the “hot” and “neutral” and protective ground.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
The MOV will conduct when the voltage exceeds 50% of line voltage.
He then asserts :
It also is a device that limits the change in current flow.
What is lightning?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Is it common for girlfriends to have close male friends who are single and not related to them?
He then describes the function of a fuse.
In schematic diagrams this is the symbol for a fuse:
It seems Mohan does not understand the difference between a comment and an Answer.
Fighters react to Kamaru Usman's rebound win vs. Joaquin Buckley at UFC on ESPN 69 - MMA Junkie
Because the load is inductive, the current lags the voltage.(by a bit).
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
How do you get people to follow your Quora Space?
This one hit behind the barn.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Why did my ex move on so quickly?
The bolt then partially travels down the line to your home.
A fuse is a non-resetable over current circuit protector.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Why hasn't Japan legalized same-sex marriage?
Upvotes:
This is the picture of an electronic coil of wire wound around a core of magnetic material.
These are simplified answers to the original question, and does not change anything I wrote above.
Why did my ex replace me so fast?
For this case there are devices called Metal oxide varistors (MOV).
There are two important concepts here.
At one ohm, the resistor has a maximum of 1 watt power.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
At least they know the answer if they wanted it.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
(Dc diagram shown, AC is similar).
Barnstars:
This device then solves the entire problem.
This is 'the assistant's answer'
eight
So, the voltage could go up to 500 volts, and the fuse will not open up.
An AC voltage/ current source, and an ac inductive load.
But it can get overloaded, and no longer works.
He then describes Rainy Season and Lightning.
One is “what exactly is in a ‘surge protector’ ? ”
but I think this circuit , shows a few more pieces.
[old diagram got deleted by accident]
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
The other is “what does a “fuse” do?”
but this device (an Inductor) … impedes the rapid changes in the current.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
One
What does a fuse do?
nine
There are three different concepts here that are getting confused.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
I post the exact comment here.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
the problem then depends on "how fast does the fuse operate?".
so, what happens?
[image of Common-mode choke]
a photo is worth a thousand words.
A circuit breaker is similar, but is resettable.
Now when you have a certain ac resistance, then a current flows in a loop.
what exactly is a ‘surge’ protector?
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
The third is lightning and “how it gets conducted into a home.”
Edit 2024–10.
Here is a simplified AC power diagram.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.